Hot pink manicure with designs. Photo for short, long nails with rhinestones, sparkles, foil

Stylish manicure Is a successful combination of materials, color, shape and design. In the spring and summer, hot pinks are very popular. Experienced nail technicians have many options for using this color in various techniques.

Hot pink manicure. Fashion trends

Hot pink manicure (with or without design) is most common in the following variations:

• classic staining with gel polish of one shade;
• combination with other colors (contrast, monochrome, analog);
• gradient;
• moon manicure;
• French;
• aquarium technology.

Gradient is very popular this year. This technique looks impressive as an independent design, and can also be performed as a basis for inlay, stamping and other techniques.

Along with the gradient, the classic jacket and monochromatic manicure do not lose their relevance. A folding jacket in bright pink shades and arched modeling have a special charm.

Nail length

The presented shade has no restrictions on the length of the free edge. It is not the color that depends on this parameter of the nail, but the possibility of implementing design solutions.

On short nails of a pink shade, the following manicure options will be stylish:

• lunar;
• stamping;
• inlay;
• geometry;
• decoration (sparkles, sand, foil, cobweb, etc.).

For techniques such as an aquarium, a gradient, a jacket, a free edge length of at least 3-5 mm is required.

Nail shape

It is mistakenly believed that the selection of the shape of nails depends on the chosen shade.

First of all, the master pays attention to such characteristics as:

• cuticle shape;
• the length and thickness of the fingers;
• shape, width, condition of the natural nail plate;
• type of activity of the client.

An experienced specialist can correct visual imperfections when filing a form, and build the correct architecture during modeling.

Successful color combinations

The most popular combination is considered to be a combination of pink and achromatic colors. Black and white are considered universal shades, suitable for full coverage of the nail plate or design.

To perform a gradient, two or more colors are used (depending on the length of the free edge). It is preferable to use shades of monochrome harmony, ranging from the darkest to the lightest.

For a manicure with alternating colors on the fingers of one hand, you can use a monochrome, analog, contrast, tetraidal color scheme. In a monochrome combination, lighter or darker shades of the same color are used, obtained by adding black or white to it. Others involve a combination of pink with other colors located on the circle.

Accessories

The use of decorative elements gives originality and expressiveness to the design. The manufacturers of this product have developed a wide selection of decor suitable for both professional craftsmen and beginners.Given the characteristics, the entire list of decor can be disbanded in groups.

Grouping table for decorative elements for manicure.

How to make a beautiful hot pink manicure. Step by step instructions, ideas

A hot pink manicure with a design can be done using one of the techniques:

• gel polish for natural nails;
• leveling gel polish for natural nails;
• modeling.

Techniques differ in the set of tools and materials, therefore the result will also be different. To choose the right technique, you need to consider each in more detail.

It is worth considering that regardless of the choice, the first stage of any manicure is the treatment of the lateral sinuses, subcutaneous space, the removal of pterygium, keratinized skin, overgrown cuticles.

A step-by-step scheme for performing a pink manicure for natural nails:

1. Treatment of the nail plate with a buff or a soft file to raise the scales and remove gloss. This will provide improved adhesion between the natural nail and the artificial material. Sawing off the free edge, taking into account the selected shape.
2. A dehydrator is applied to the treated plate to remove excess moisture and dried for a few seconds in the open air.
3. A primer is applied to the free edge of the nail with a semi-dry brush. This liquid has strong stickiness and serves as double-sided tape between the natural nail and the base.
4. A base coat is applied to the dried nail with a thin layer and dried in an ultraviolet or ice lamp.
5. Next, apply gel polish of the selected shade and polymerize in a lamp.
6. The result is secured with a top without a sticky layer.

This technique allows you to save a manicure for 10-14 days. However, thin layers of material do not allow to correct the existing defects of the nail plate.

The technique for making gel polish with alignment is similar to that described earlier in the article. It allows you to strengthen the nail plate, visually correct existing minor defects, as well as correct the architecture of the nail.

The main difference is the application of a second base coat with leveling. A base is thinly applied to the first layer of the nail dried in a lamp. Then another drop is taken on the brush and distributed over the surface, forming a correct longitudinal and transverse arch. After a complete polymerization cycle, a colored coating and top are applied.

Artificial nail modeling has even greater possibilities. The technique allows you to create nails of any length and shape. Arched extension is very popular. The procedure can be carried out using upper (reusable) and lower (disposable) forms.

Step-by-step instructions for modeling nails on paper forms:

1. Preparation of a natural nail plate: sawdust at the root of the free edge, removing gloss, lifting scales, degreasing the surface. Application of a dehydrator, and after complete drying of the primer.
2. After the primer has dried in the open air with a thin layer, the plate is coated with a base coat. A complete polymerization cycle is performed in the lamp.
3. Paper forms (with an adhesive base) are trimmed in the smile area and side ridges to anatomical shape to ensure a snug fit. After that, observing the central axis and the angle of inclination, it is placed under the natural nail without touching the hyponychium.
4. Using the selected material (gel, poly-gel, acrylic), a thin substrate of the future nail is formed. The markings on the form help maintain the length and level of lateral parallels.To dry, the substrate must go through a full polymerization cycle.
5. At this stage, using a brush, the correct architecture of the nail is formed (apex, longitudinal and transverse arches, flare). The material is distributed over the nail without lifting the brush from its surface. The result is dried in a lamp and the sticky layer is removed.
6. The paper forms are removed, after which the shape of the free edge is filed and the architecture is modified (if necessary).
7. Before applying a pink tint or making a design, dust formed during the sawing process is brushed off with a stiff brush. Wipe the surface and sinuses with a lint-free cloth dipped in a liquid to remove stickiness. The completed design is fixed in the lamp.
8. The final stage is the application of a topcoat followed by polymerization.

Matte manicure for long nails

A bright pink manicure with a velvety design is performed with a special top. Its unique formula creates an effect on the nail that visually resembles frosted glass. Using a top will soften the sharpness of saturated colors without losing brightness.

The material looks great on both long and short nails, adding charm and zest. May cover all nails or alternate with glossy surfaces.

The combination of hot pink with white

There are three ways to combine white and pink. In the first case, white is one of the gradient colors that form a smooth transition from a lighter shade to a darker one. This is the most technically difficult combination.

Often, white gel paint is used to paint flowers, monograms, geometric patterns and lines. In this case, you will need the skill of using brushes of various shapes. Modeling is considered the most difficult design technique. In addition to execution skills and tools, you will need a special white material.

The easiest way to combine these shades is to alternate them on the fingers of one hand.

The combination of hot pink with black

By analogy with white, black can act as an accent on several fingers or be part of a design. In addition to manual drawing of patterns on various subjects, black is most often used in stamping.

Required set of tools:

• plate with engraving;
• scraper;
• stamping paint;
• silicone stamp;
• paint remover;
• lint-free napkins.

This technique allows you to transfer an impression of patterns of varying complexity from a metal plate to a nail. The pattern engraved on the plate is filled with stamping paint, the excess is removed with a scraper. Using a silicone stamp, it is quickly transferred to the selected area.

Glitter manicure

A hot pink manicure with designs that shimmers in the sun can be achieved using glitter. Depending on the particle size and there are two ways to apply and attach glitter to the surface.

To apply glitter, use a brush to make a mixture of dry glitter, a transparent base, or a top without a sticky layer. The method allows you to apply the composition to the entire nail or pointwise to certain areas. After application, the design must be dried in a lamp, and, if desired, covered with a top coat for smoothness.

The radically opposite way is to create a rough surface. The surface of the nail is covered with a top without a sticky layer. The wet layer of material is sprinkled with sparkles, the excess is shaken off. After 3-4 seconds, the nail is sent for a full polymerization cycle. The effect depends on the grain of the glitter.

Foil design

There are three main types of foil:

• transferable;
• gold leaf;
• cut loose.

To print the transfer foil onto the surface of the nail, use a special glue or the stickiness of the top remaining during the polymerization process. Leaflet and cut foil can be applied to a thin layer of base or top, after which the design must be dried in a lamp.

Manicure with rhinestones

In addition to glitter, you can make your manicure shine using rhinestones and stones. By combining their color, size, degree of light reflection, an experienced craftsman is able to create a stylish design that surpasses painting in spectacularity.

It should be borne in mind that the more voluminous the structure, the more rigid and thick material is needed for its fastening. When performing a design with a large number of elements, they should be applied in stages, with intermediate drying. Otherwise, the rhinestones may blur, breaking symmetry.

Ombre

A bright pink manicure with an original design in the ombre style is a kind of gradient. A prerequisite for its implementation is the presence of a white or very light shade on the free edge.

Experienced masters use a special brush with dense pile at the base and thin at the end to mix shades. At home, you can use a fine-pored sponge.

Moon manicure

This manicure involves staining in pink only the semicircle in the lunula area of ​​the natural nail. Or, on the contrary, the zone remains free, and the rest of the nail surface is painted.

There are various variations in this technique:

• combining shades of gel polishes;
• drawing the moon with sparkles;
• laying out with rhinestones;
• use of foil.

French

A classic jacket is performed using a material (base, gel, polygel, acrylic) in a natural shade to form the nail bed. In the laying out technique, the smile line is formed by hard materials.

A more simple technique is considered to paint a smile with a thin brush. It allows you to use two shades of pink. One of them acts as a basic one.

Cat's eye

In this series of gel polishes, pink shades are not the most popular, but they have their fans. The main uniqueness of the product is its ease of use.

The direction of the beam and the flare it creates are controlled by a magnet. Magic overflows give dynamics to the manicure. There is a feeling of constant movement of particles on the nail.

Casting

Visually, this design resembles a drawing made with molten metal. The foil gives the picture a metallic sheen.

Step-by-step instructions for performing a hot pink manicure with casting:

1. It is necessary to successively apply two layers of pink gel polish on the entire surface of the nail with intermediate drying. After removing the stickiness, the color should be treated with a buff.
2. Using a thin brush, a drawing is applied with black gel paint. For foil to be printed, it must have good tack after drying. The polymerization time is at least 2 minutes.
3. A piece of metallized transfer foil is applied to the pattern and pressed well. With tearing movements, it is applied to the entire surface of the pattern.
4. The result must be secured with a top, followed by polymerization.

Kamifubiki

This decor consists of flat round elements of various sizes. They can be glossy, metallic or matte. A separate type of kamifubik are images of fruits and dried flowers.

The decor is applied to the wet layer of the base or top. Layout can be chaotic or compositional. For fixation, a full polymerization cycle is performed and then covered with a top-leveling layer.

Broken glass

The technique got its name because of the similarity of the resulting effect. Small pieces of foil or film of various shapes with an overflow applied are placed side by side, leaving small gaps. Then covered with a transparent or translucent top.

Visually, the design resembles broken glass, and when sunlight hits the film, holography creates beautiful overflows. The application and fastening of pieces of broken glass is carried out by analogy with kamifubiki.

A manicure for a modern woman is not only a nail care procedure, but also an opportunity for self-expression.Bright pink shades, complemented by a spectacular design with decor, will emphasize the color of the skin and are suitable for various accessories and garments.

Video about manicure

Top 50 hot pink manicure ideas with designs: