How to make a DIY hair accessory from beads and wire, satin ribbons, beads, foamiran, with rhinestones. Step-by-step instructions with photos

You can add originality and charm to any hairstyle with the help of jewelry made with your own hands from beads, wire, ribbons, lace, beads and other materials at hand. Decorate with hairpins, hairpins or hair combs, you can create an exclusive styling for an evening festive event, or diversify your daily hairstyles.

This requires a little free time, a set of necessary materials and a little bit of imagination. You can sketch the desired decoration on paper, or simply in your imagination. As you make your product, you can try experimenting with different options for different materials and additions until you get the best result.

Headband made of beads and ribbons

An ordinary plastic or metal hair band can "pacify" unruly hair or bangs. But with your own hands it is not difficult to make it an excellent decoration by using satin or silk ribbons, beads and wire for this purpose. You can make flowers from ribbons and weave a decorative braid, and embroider the field of the rim and its edges with beads, or place it in the center.

To decorate the hoop you need:

• satin or silk ribbons;
• fast drying glue;
• wire or fishing line;
• beads of the desired color and size;
• plastic standard rim, wide or narrow (optional).

At the beginning of work, you need to stick small pieces of tape on the ends of the hoop from the inside. To create the main background of the rim, you can take a ribbon of guipure, lace or satin, up to 3 cm wide.For making floral decorations, you can take a ribbon wider, the wider the ribbon - the larger the flower diameter. You will also need a narrow ribbon on the pigtail.

Performance:

1. Wrap the hoop tightly with tape at an angle of 45 degrees, slightly overlapping the edge of the previous strip, leaving 1 cm of tape at the beginning and end of the rim. Tuck the ends of the tape and sew to the previously pasted pieces of tape from the inside, thus securing the basis of the future decor.
2. Weave a pigtail of the required length, fix it along the hoop with glue, tuck the ends inward and glue.
3. In the center of the ribbon braid, stick or sew on beads at the same distance from each other. String the beads onto the wire and secure the ends along the edges of the rim.
4. Make a flower from a ribbon or lace by collecting one side of a similar braid on a thread and pulling it along the thread until a flower is formed, then stitching through the base plane of the workpiece.
5. You can sew 1 or more beads into the center of the flower and fix the flower on the hoop in the desired location using glue.

Such a design of the rim does not require much effort or material costs and will bring a lot of positive emotions.

Vintage beaded wedding decoration

A vintage wedding hair ornament made of beads and wire with your own hands is not difficult to make at home, after spending a little time.The vintage style includes pastel colors of pale pinks, blues and yellows, as well as pearls and whites. Accessories for such jewelry must be selected in such tones. You can make a wedding wreath, tiara, crown, or twig.

To make a hair wreath you will need:

• silver wire;
• beads of pearls or bugles of pale colors;
• colorless, fast drying glue;
• thin metal bezel.

The headband will be the base for the wreath and then you can attach the veil to it.

For any decoration, it is better to first draw a rough sample of the future product on paper.

Performance:

1. Cut the wire into pieces of 10-15 cm for the branches of the wreath and put on several beads on each, you can have different sizes. Then, scroll each bead around the axis several times, thus creating legs for each separately, of different lengths.
2. Having thus secured all the beads in the middle of the piece of wire, twist the edges of the wire together in the same way. The result is a small twig with a few beads. The more such blanks there are, the more magnificent the wreath will turn out.
3. Fasten the workpiece with beads on the rim, forming the arrangement and inclination of the branches at different heights and in different directions. Clamp the bases of the legs well on the rim and apply a drop of glue to the attachment point of each workpiece.

You can make a wedding boutonniere from the same blanks by tying together several branches with a white, satin ribbon in the form of a bow.

Beaded Wedding Hairpins

Hairpins for the bride's hairstyle are decorated with a similar method and from the same materials. The legs of the twigs with beads are fixed at the bend of the hairpin. On 1 hairpin, you can screw on several branches or beads, the legs of the blanks can be made shorter and the number of beads on a branch can be reduced. You can make a flower from beads by combining different shades and using beads.

Another option for decorating hairpins is to make a flower from braid, or a narrow ribbon, and sew a bead into the center of the flower. Then fix the workpiece on the hairpin.

Comb with rhinestones for a wedding

A comb is often used to style the long hair of a wedding hairstyle, with a variety of decorative options. The comb, with which the short veil is fixed, or in the form of a hairpin in the hair, looks spectacular. Rhinestones have 2 through holes for fastening. To decorate the comb with large rhinestones, the wire must be taken with a thickness of 0.4 mm.

Performance:

1. Pull the wire through the top row of rhinestone holes, form a pattern, or part of it, then pull the wire through the bottom holes.
2. Attach at the same time to the top of the comb by braiding over the comb teeth.
3. Wrap the rhinestones gathered in a pattern with wire along the entire length of the comb and twist the ends of the wire with round-nose pliers, cut and bend the sharp ends.

The second way to decorate a comb with rhinestones is to sew the adornment onto dense fabric or leather and glue it to the comb, attach it with wire or threads.

Hairpins with flowers from foamiran

Hair jewelry can be made with your own hands not only from beads and wire, including wedding ones, but also from floral elements made from foamiran. One of the accessories will be a hairpin with a lush, white rose, or several smaller flowers.

It is not difficult to make jewelry, since foamiran takes on well and keeps the given shape, does not lose color under the influence of water, and products made from it are very light.

To create a hair clip you need:

• foamiran of the desired color;
• glue "Second";
• scissors;
• cardboard;
• thin wire;
• a few small beads or crystals;
• candle or lighter;
• a hairpin or clip on which the flower will be attached.

Foamiran needs two colors - light or white for the flower itself and green for the leaves.

Performance:

1. The template for flower petals and leaves must be cut out of cardboard, depending on the size of the desired flower.
2. On a sheet of material with a toothpick, outline 8 blanks with 4 petals each and cut out, forming a wavy edge.
3. Put all the finished petals in a stack, twist slightly so that they are slightly rounded and easier to assemble into a flower.
4. Each petal must be held over a candle or lighter and with your fingers squeeze out the heated part a little, round it off, and squeeze the bottom of the petal a little.
5. Make several stamens for each flower from beads and wire, twist the bases of the stamen legs together.
6. Collect all the petals around the stamens, superimposing and slightly shifting in a circle. Each part must be glued at the base, lightly pressing against the previous one.
7. From green foamiran, cut a cup for a rose from 4-5 leaves, roll the tips slightly to the outside, pierce it in the center with a toothpick and put it on the base of the flower, after dropping glue.
8. Cut out the leaves and attach to the stem as well.
9. Fix the flower on the hairpin with glue.

Foamiran wreath around the bundle

Foamiran products are practical and lightweight; if necessary, they can be washed or tinted with a different color. From different shades of material, a beautiful wreath is obtained around the bundle, if the flower legs are fixed on a metal rim, or a wire circle and pinned to the hair.

Pearl invisible

DIY hair jewelry made of beads and wire is very easy to make from invisible ones. Pearl bobbins can be used for daily styling alone or in combination with other hair decorations. It is necessary to take a piece of wire, fasten it at the beginning of the invisibility, string a bead, wrap the wire around the top of the hairpin, tighten and repeat the operation until the end of the invisibility.

Then fix the end of the wire, bite off and you can thread the end of the wire into the last bead. The silver wire will not be visible against the pearl background. In the same way, you can make beads on legs by scrolling each one around the axis several times. You will get a more voluminous decoration.

Red beaded wreath

For a wreath of beads, you need to make a ring to the size of a circle from a thick soft wire. Cut 25-30 pieces of thin wire, 10-12 cm long. String the beads into pieces of several pieces and prepare twigs and flowers from them on long legs. Then, with ready-made branches, braid the rim of the wire according to the type of wreath weaving and secure.

Carefully wrap the gaps between the legs on the rim with a satin ribbon that can be tied into a bow, or trimmed and neatly sewn.

Dragonfly on a stiletto

You can beautifully decorate hairpins with wire beads or dragonfly-shaped beads. This requires colored and white beads, a piece of wire about 1 m. The weaving of a dragonfly begins from the body of the product, to which then 1 or 2 rows of wings are attached, if desired. For the eyes of a dragonfly, you need 2 beads of a larger size and a dark color.

Performance:

1. Large beads for the eyes are put on a 60 cm piece of wire, a small bead and three beads of the body of the future dragonfly are inserted between them.
2. Place the beads for the eyes in the center of the segment, and the next 3 in the back, creating the beginning of the body. Pass the other end of the wire through the same 3 beads and pull up.
3. In the next row, put 4 beads, also passing both ends of the wire through these beads. In this way, weave the body of the workpiece, reducing the number of beads towards the end of the body.
4. Pass a piece of wire through the 3rd row and cast on 25 beads from 2 sides to form the wings, stretch the ends of the wire through the next row of the body, tighten and fasten.
5. In the same way, make the second pair of wings.
6. Attach the finished product to the hairpin using a wire.

Lily of satin ribbons on a hairpin

It is not difficult to decorate a hairpin with a lily flower made from a satin ribbon with your own hands.To do this, a cardboard sample of a flower petal is cut out, blanks from the ribbon are cut along it, the edges of the petals are processed over the candle. To shape the workpiece, hold it over the flame and shape it with your fingers.

On the seamy side of the petal, apply longitudinal stripes, collect and glue the bases of the petals, attach the finished stamens. Glue a circle of fabric on the base of the finished flower and glue it with a hairpin.

Comb with a sprig of beads

To decorate the comb with a beautiful sprig of beads, you need a wire 0.2 mm thick and the beads themselves. The wire is fixed on the base of the comb, beads are strung on it and a leg is made by scrolling each bead around its axis.

Beads on legs of different lengths form a twig.

Make several such branches of different heights and different configurations on the comb. Put the resulting blanks in the form of a twig.

Chamomile from ribbons and beads on the rim

A regular headband can be decorated with daisies made of satin ribbons and beads. To do this, you need to wrap the bezel with tape and stick the made daisies. The flower is made from a narrow satin ribbon, cutting the strip into 28 pieces, the length of which is 8 cm. Fold the pieces in half and melt them over a candle flame. Prepare 3 felt mugs for each flower.

Glue 14 blanks of petals on the felt part in a circle, glue another row of ribbon petals on top. Glue a felt circle into the center of the blank, sew a few yellow beads to it, or cover it with yellow beads. Glue the finished flower to the hoop, fix the inside with a felt circle with glue.

Headband with roses from foamiran

You can decorate the headband with foamiran roses, making flowers smaller than for hairpins. Ready-made roses are glued from the center of the rim to the ends, leaves from green foamiran are glued under the flowers.

Foamiran forget-me-not wreath

A wreath of forget-me-nots can be woven from individual flowers or from gathered in bouquets. Petal blanks are cut with a curly hole punch or by hand. You can round off the petals by attaching them to a not very hot iron.

Put the rims of the petals on the wire stems, fixing in the center with a bead or a drop of glue. Twist the stems around the rim, or weave like a regular wreath of fresh flowers.

Headband with flowers from ribbons and beads

There are many options for decorating a hoop with satin ribbon flowers, which can be made large and small, or combined. Filling the center of the flower with beads allows you to hide the places where the petals are glued. You can diversify the jewelry by adding beaded twigs between flowers, or using glue to glue sparkling beads on the surface of flowers and leaves.

This decoration creates the effect of dew on the flowers.

All the materials needed to create hair jewelry are always available in craft stores. These accessories are useful for schoolgirls of any age, for older girls and adult women. A handmade wedding accessory made of ribbons, foamiran or beads and wire will remain a pleasant memory of an important event.

Video: DIY hair decoration made of beads and wire

We make hair jewelry with our own hands from beads and wire:

Find out how to make a comb out of wire in the video clip: