How to pin a long bang short when growing. Ideas with photos

When growing bangs, many girls are faced with the question of how to pin the front strands. After all, the hairstyle should always look neat. You can cope with the task using the algorithms described below. To make the styling more varied, you should choose several methods and alternate them.

Pros and cons of bangs

Comparison of the advantages and disadvantages of bangs are summarized in the table:

How can you remove bangs when growing?

There are a wide variety of ways in which you can style the regrown strand in your hair. When choosing one of them, you should pay attention to the length of the bangs. Because if you put too short a bang in a tourniquet or braid, then the ends of the hair will knock out of the hairstyle. This will create a sloppy look.

French braid weaving

The French braid allows you to very elegantly remove the growing bangs. This option is perfect for a festive evening. It will be combined with both gathered hair and loose curls.

To create such an image, you should perform the following sequence of actions:

1. Separate part of the hair from the corner of the parting. Divide it into 3 strands.
2. Start braiding in a downward direction. Place the extreme strand under the central one. On the reverse side, repeat the previous action with the addition of a pick-up. After this step, weaving should be performed, while picking up the curls from both sides and drawing the strands.
3. When the spikelet touches the opposite edge of the forehead, you should stop adding grabs. The braid must be braided and fixed with a thin elastic band.
4. Bring the free end under the total mass of the hair and secure with two invisible crosswise.

There is another way to hide long bangs with a French braid. In this case, the weaving will resemble a beautiful volumetric headband. The resulting styling can be combined with casual wear. If there is a need to attend a festive event, then it is enough to curl loose hair, having previously lifted the root zone at the crown with the help of a fleece.

To make a French braid in the form of a rim, you need to follow the instructions:

1. Highlight hair from ear to ear. It is better to remove the remaining curls back so that they do not interfere.
2. From the temple upwards, start weaving a French braid. Divide the curl into 3 parts. Each outer strand should be placed under the central one, picking up the curls from both sides. As you work, you need to remember about the hood so that the braid turns out to be of the same thickness.
3. After the braiding reaches the opposite temple, you should stop performing the picks. Secure the free end of the braid with a thin silicone rubber band, put it behind the back of the head and fix with two invisible ones.

How to pin bangs when growing is a question that many girls ask. To get a fuller hairstyle as a result, you can use another option for creating a French braid.

To do this, you need to use the sequence of actions:

1. Divide the front of the curls with a side parting, which should start from the edge of the forehead. The smaller strand should be pulled behind the ear so that it does not interfere during the process.
2. Most of the hair on the front should be parted again.
3. Select a strand at the crown of the head and start creating a French braid. The free edge may not be fully woven. It is enough to bring it under the total mass of hair and fix it with two invisible ones.
4. Repeat the previous step with the front of the bangs.

Spit vice versa

This braid goes well with loose hair. However, if necessary, you can collect curls in a low bun or tail.

To create this image, use the following algorithm:

1. Select part of the hair from the forehead. Divide it into 3 curls and start weaving the other way around, bringing the extreme strands under the central one.
2. After creating the first link, you need to perform the first pickup. To do this, it is necessary to separate the strand with a knitting needle with a vertical parting from the crown to the periphery. It should be attached to the curl, which is located near the very edge of the forehead and continue to weave in this way to the temple.
3. Bring the free edge of the braid under the total mass of the hair and fix it with two invisible pins.

You can do another variation of the braid in reverse.

To do this, follow the instructions:

1. Separate 2 parallel partings, which will start from the edge of the forehead.
2. Select a small part of the bangs, divide it into 3 strands and start weaving the spikelet in the opposite direction. During work, do not forget to carry out the hood and pickups.
3. Stop weaving at the crown. Expand the remaining tail a little and secure it with a silicone rubber band or ordinary invisibility.

Fish tail

This way of masking the overgrown bangs looks very neat and elegant. It can be easily combined with both gathered hair and loose hair. However, it should be understood that sufficient front strand length is required to use this method.

In order to perform a fishtail, you need to adhere to the algorithm of actions:

1. Comb your hair thoroughly. Part in the center of the head.
2. Alternately take a thin strand on one side and throw it on the opposite. During work, do not forget to make grabs. In this case, you should not carry out the hood so that short strands of bangs do not look casual.
3. Fix the braid in any convenient way.

How to pin bangs while growing is a problem that can be solved by creating a fishtail. For this option, you also need to have a certain hair length. Otherwise, the hairstyle may come loose. Styling is combined only with loose curls.

In order to perform another version of the fishtail, you should follow the instructions:

1. Determine the parting at one edge of the forehead.
2. Take a small amount of hair. Divide into 2 strands. Start braiding towards the opposite temple. As the work progresses, pickups and pulling should be done.
3. After all the curls above the ear are collected, you must stop adding strands and braid the free end of the braid. Secure with silicone rubber. Lead behind the head and hide with the help of invisibility under the total mass of hair.

Scythe harness

This method is perfect for bangs that are not yet very grown, which already need to be masked.The method is quite simple and takes a minimum amount of time. Therefore, it is an excellent option for getting ready for work or school in the morning.

In order to perform it, you must follow the algorithm:

1. Use a knitting needle to define a side parting.
2. Comb the curls towards the opposite temple. Take a small strand in your hand, scroll it, gradually moving down. In the process, you need to add strands at the edge of the forehead.
3. If desired, and the presence of a certain length of the front strands, an extension can be performed.
4. Lead the tourniquet to the side, hiding it under the bulk of the hair. Fix with two invisible ones.

Accessories

To pin the bangs, you can use a different set of devices.

Among the most popular are the following:

• invisible;
• hairpins;
• silicone rubber bands;
• small crabs.

Each of these accessories quite securely fixes the front strand and can simultaneously act as a decoration. Headbands and headbands are an excellent option for masking overgrown bangs.

With their help, you can refresh the image in a few seconds and remove curls at the same time. However, one should not forget that if the accessory is large, the strands will knock out of the styling, and too narrow a size will put pressure on the temples, causing a headache.

Pinning bangs back

When growing, you can either lay the bangs using various weaving methods, or pin them back. The latter method involves using less effort and time.

The algorithm for laying the front strands using invisibility involves the following steps:

1. Remove the bangs on the forehead. Comb through it thoroughly.
2. Bring your bangs back. Twist the end and point it forward a little to get a little extra volume.
3. Secure the ends with two invisible ones. To get a more reliable result, you need to arrange the accessories crosswise.

Hairpins are more suitable for a sleek styling option.

The algorithm is the following sequence of actions:

1. Use a knitting needle to separate the front strands.
2. Direct the bangs to the crown. During the process, do not forget to additionally comb your hair.
3. Fix the curls with two hairpins, which should be directed towards each other.

Silicone rubber bands are a great alternative to any other accessory. It is better to use transparent options than to match the shade. Many girls do not wear such rubber bands for fear of damaging their hair.

However, to remove them, it is enough to cut the accessory from above. It is very easy to remove regrown strands with silicone rubber bands, while styling is perfect even for short lengths.

To do this, follow the instructions:

1. Comb the bangs back.
2. Grab a small strand with your index finger and thumb. Move towards the crown and secure with a transparent silicone rubber band.
3. Repeat from the previous step until all the hair from the bangs is collected.

Small crabs are very handy and easy to use. However, they have one drawback. It consists in the fact that the front strands must be of a certain length.

In order to remove the bangs back using these accessories, you must follow the sequence of actions:

1. Divide the front of the hair into 3 longitudinal parting.
2. Take the first strand in your hand. Scroll it around its own axis and fix it with a crab.
3. Repeat from the previous step with the remaining curls.

Styling products

Hair fixing agents are necessary for the following features:

• short length of the front strands;
• porous structure of curls;
• the presence of a gun.

In all these cases, you should use mousse, gel or varnish.

How to hide long bangs

How to pin a bang when growing, if it already has a good length, is an easy question to find an answer to. After all, the easiest way is to lay the already regrown front strands.

To do this, you can use any of the methods described below:

• Highlight bangs while blow-drying... Screw it onto the high volume brush towards the crown. After the strand has cooled, fold it back. This way the bangs will blend in with the rest of the hair and will not stand out from the bulk.
• After styling, make a zigzag parting. For this it is better to use a knitting needle. This hairstyle allows you to make the curls visually lush.
• Using a hair dryer, pull the front strand towards one of your temples. During work, the root zone should be raised. After the bangs have completely cooled down, draw a side parting with a knitting needle.

How to pin a medium bang

Medium length eliminates the use of bobby pins and bobby pins. However, it is better to resort to styling products so that the hairstyle always looks neat.

To style your bangs, you should use the following methods:

• Using a large diameter curling iron, you can set the desired direction for the front strands. After the curls have cooled, they must be combed, the most suitable parting done and a little varnished.
• Separate a small amount of hair from the forehead and comb the root zone. Then separate the next strand and repeat the previous step. After that, the hair should be swept back or to the side. During work, you can use a special powder. It additionally raises roots and has a fixing property.
• Run an even parting in the center of the head. Warm up the iron and with quick, smooth movements, take the strands away from the face towards the crown. After combing the curls, mixing them with the bulk of the hair.

How beautiful to remove short bangs

With a short length, removing the bangs is quite problematic. Usually, a similar problem occurs at the very beginning of the growing of the front strands.

To ensure that the installation always looks neat during the process, you should use the following recommendations:

• Perform side parting. Twist the bangs into the tourniquet, adding hooks as you work. If the length of the hair does not allow you to make the tourniquet neat, then you can divide the strand longitudinally and twist each of the parts separately.
• Various weaves are an excellent option for pinning short bangs. There is one nuance to consider here. To make the hairstyle look better, it is necessary to take long hair during picks.
• If the length of the bangs is very short, then it is better to use the following method. You should make an even parting in the center. From the middle of the forehead, braid the spikelets towards the temples. Bring free edges under the bulk of the curls and secure with any suitable accessory.

How to remove bangs if your forehead is high

A high forehead is not always an advantage. In the event that there is a need to make it visually shorter, you can resort to using various partings. For example, if you perform the classic division of hair in the center, then the extreme strands directed downwards will conceal the height of the forehead.

How to pin bangs when growing, if a girl has a high forehead, is a problem that can be easily solved with the help of a French braid.

To do this, you need to follow simple instructions:

1. Perform side parting.
2. At the edge of the forehead, take a small amount of hair and start braiding towards the opposite temple. The braid should cover the forehead slightly. During the process, hair should be picked up only from the side of the crown.
3. Braid the free end, put it behind the head and fix with two invisible ones.

Stylish hairstyles with bangs removed

There are many variations of hairstyles that can be easily paired with pinned bangs. Among them, a high tail with a braid should be distinguished.

To create such a styling, you must follow the instructions:

1. Select a small amount of hair at the edge of the forehead. Divide it into two strands, start weaving the fishtail, picking up the curls at the edges.
2. The thinner you choose the strands, the more prominent your hairstyle will be. Before reaching the crown, stop weaving and fix the bangs with a silicone rubber band.
3. Collect the remaining hair in a high ponytail. Attach the free end to them from the fixed bangs. Secure with elastic band. Hide it with a strand. Add varnish if necessary to smooth fine hairs.

Another interesting hairstyle with bangs removed is presented in the form of a low bun. As with the previous method, the front strands are woven into the braid.

To do this, you need to follow the algorithm:

1. Use a knitting needle to define a side parting. Separate the bangs and the temporal part of the hair from it, including long strands. Stab.
2. Remove the rest of the curls in a low tail. Put on a donut and wrap the ends in a low bun.
3. Remove the clip from the bangs. Select a small section of hair near the parting and start braiding the French braid. As you work, you should carry out the hood and pick up the extreme curls.
4. Braid the free end of the braid to the end. Secure with elastic and wrap around the bundle. Secure with hairpins.

You can diversify your casual look with another braided ponytail.

To create it, you should follow the sequence of steps:

1. Separate the parting, which will be located from the edge of the forehead to the crown.
2. From the parting, start weaving a regular spikelet. It is important to carefully smooth each strand so that short hairs do not knock out of the hairstyle. Weaving should be stopped at the back of the head.
3. Gather loose curls in a ponytail, grabbing the end from the braid. Secure with an elastic band. Disguise it with a curl.
4. To make the hairstyle suitable for a festive occasion, you should curl the ends of the ponytail, beat them and fix them with any suitable means.

For a special occasion, you can remove the bangs in a high pile.

To do this, follow the sequence of steps:

1. Wash hair and apply any fixing foam. When blow-drying with a wide brush, direct the curls in the opposite direction.
2. Select the entire front of the hair to the crown. Perform a bouffant, constantly fixing the resulting effect with varnish. Comb the strands loosely and secure them crosswise with invisible ones.
3. Curl the rest of the curls with a curling iron or iron. Give the styling extra puffiness by beating all the curls with your fingers. Secure with any suitable means.

For the everyday version, you can use the following algorithm:

1. Make an even parting, which should be in the center of the head.
2. Take a small strand and start scrolling it, alternately picking up the extreme curls. At the temple, stop performing pick-ups and simply twist the remaining tail into a tourniquet. Fasten with invisibility at the back of the head.
3. Repeat the action on the reverse side. Fix 2 tourniquets behind the crown of the head with any large hair clip.

When the bangs grow, the front strands stop lying neatly. Therefore, they should either be styled into the hair, or pinned using any accessories. The article describes a large number of methods to maintain a neat appearance throughout the entire process. You should choose any of them and adhere to all recommendations.

Article design: Mila Friedan