How to knit a hat. Women's, men's, children's hat. Knitting patterns

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans came into fashion. Cute hats will help to complement the image. with patterns, pom-poms or "ears".

Clothing stores offer many models of hats - for men, women, children. However, it is worth investing time and money to find an accessory that matches the overall look. Needlewomen can save money while knitting stylish hats for the whole family. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation.How to knit a hat. Knitting patterns for women's, men's, children's hats with a description can be found in this article.

We knit a hat with knitting needles for women and men

Before knitting, you need to choose the right yarn and knitting needles. The yarn depends on the season and model. Winter hats are knitted from yarn with a high wool content, spring hats - with acrylic. Bulky yarns are suitable for models with large patterns and coarse knits. Thinner yarns work well for tight knits with fine patterns.

Hats are usually knitted on circular knitting needles - so the product will turn out smooth, without seams. Elastic band for tightness is knitted on thin needles. Moving on to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers for the marks of the beginning of the row and the loops necessary when working, as well as a needle, hook and an additional curved knitting needle for braid patterns.

Before choosing and starting to knit a suitable model, you need to understand a few general rules that will be needed when knitting any hat.

How to add loops on a hat with knitting needles

Usually, the addition is made in the next row after the elastic, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows, depending on the model.

You can add stitches in the middle of the row in different ways. The most convenient methods of addition are from the previous row and with the help of a yarn.

From the previous row, you can make a loop from a broach, that is, a thread between two loops, or from a loop of the previous row. The broach is pounced on the left knitting needle and knitted with the front one - an additional loop is obtained.

If you pick up, pull out and knit the loop of the previous row with the left knitting needle, you will also get a new loop. This will turn out most imperceptibly - in the general knitting it will be difficult to find places for an increase.

With the help of a yarn, the loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop on the back of the purl. Otherwise, the addition will stand out with a small hole between the threads.

Hat with front stitch (garter stitch) knitting

Beginners knit simple hats with front stitch or garter stitch. These are the easiest ways to work.

The front surface assumes the alternation of rows with front and back loops. On one side, the canvas will have a smooth vertical pattern (front side), on the back - a pattern in the form of transverse waves (back side).

Garter knitting is done exclusively with front loops, regardless of the side. The result is a simple embossed pattern.

Note! The front surface tends to roll up along the edges. To prevent this from happening, first knit an elastic band. Also, the edges can be "fastened" by crocheting them.

How to finish a hat with knitting needles

After the hat has been knitted to the desired length, you need to begin to narrow the crown. To do this, you need to subtract a few loops in the next rows.
Decrease - knitting two loops together... As a rule, when knitting hats, the rows with decreases alternate with rows knitted according to the pattern. At the same time, the number of loops through which decreases are made decreases.

For example, first every 10 loops, then after 9, then after 8 and 7 loops. When there are no more than 20 loops left, pull the thread through them and pull off. This completes the knitting of the cap.

Knitting patterns for hats: schemes and description

There are a lot of knitting patterns. A variety of braids, braids, rhombuses, "bumps", "leaves" look good on hats. Also, the main fabric of the cap can be knitted not only with satin stitch, but also with a certain pattern, for example, "rice" or "honeycomb".

"Rice" - a simple pattern that makes the product airy and embossed... "Rice" knits not only hats, but also snoods. The pattern works well for both bulky and fine yarns.

The knitting principle is very simple: the front loop alternates with the back loop. In the next row, knitting changes: front knit purl, purl - front.

"Honeycombs" are knitted with a draped thread. To do this, you need to dial an even number of loops. Knit a front loop in 1 row, then put the thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created like this: purl, throw the yarn over to the right knitting needle, 2 loops - front, transfer, 2 front, etc. 3 row: throw on the thread, remove the loop, knit the front with the crochet, repeat the rapport to the end. 4 row: knit 2, translate yarn over, repeat again to the edge. 5 row: knit the wrapped thread and loop, remove the loop with the yarn over, repeat. 6 knit as 2. From the 7th row, the repetition of the rapport begins - 3-6 rows.

"Braid" is the most common pattern for hats and the simplestespecially for beginners. For him, you need to prepare an additional short knitting needle.

As an example, cast on 14 loops in the usual way and knit a rapport:

• remove the edging;
• knit 2 purl loops;
• knit 8 knit;
• knit the remaining loops with purl;
• repeat 1-4 points 3-4 times (the length of the braid depends on the number);
• repeat step 1-2;
• throw 4 loops on a short knitting needle and leave before knitting;
• knit 4 front loops of the row;
• return the loops from the knitting needle to the left and knit them with the front ones (if convenient, you can knit immediately with an additional one);
• finish the row by tying purl loops;
• repeat the rapport (points 1-9).

Note! The number of loops must be even so that the loops can be equally divided into two parts.

Braids can be knitted in different lengths and widths, as well as tightly to each other or through purl loops, depending on the model and yarn. Denser and thinner braids are knitted in 3-6 rows on 4-8 loops.Wide braids are best knitted in 10-15 rows on 10-14 loops.

There are many other basic knit patterns. When choosing a pattern, you need to pay attention to its density: The denser the pattern, the better the heat will be retained, which is important for winter hats. Summer and spring hats allow for mesh or openwork patterns ("stairs", "shells", "peacock's tail", "leaves", etc.).

How to knit a winter hat for women (with a description)

Winter hats are denser, softer and more voluminous than spring hats. To knit them, you need a yarn containing at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Knitted mohair tacori hat (knitting pattern)

A takori-style hat can be considered a versatile model, as it can be worn in different variations: as a stocking hat, with one or more cuffs. Takori is a very soft and voluminous hat. This model is knitted quite simply with an English elastic band and will appeal to novice craftswomen.

To create a takori hat you will need Angora yarn (100 g / 500 m), circular knitting needles 4.5 mm (you can knit on two knitting needles), markers, and a large knitting needle.

The thread folds in two (the beginning and end of the ball are connected) and 70 loops are recruited (head circumference 56-58 cm).

Knit rapport: throw on the thread, remove the loop, front, repeat. All even rows - knit a yarn and a loop behind it with a purl, throw on a thread, remove a loop, etc.

Alternating rows, knit to the desired length (about 32 cm), and then change to a 1x1 elastic: knit a loop with a purl crochet, knit 1 and then in a circle. Subsequent rows (about 3 cm) are knitted according to the pattern.

Make a decrease through a row, knitting together every 2 loops.

Cut the thread about 10 cm from the knitting needle and thread it through the needle. Pull off the loops and secure the thread.

Hat with knitting needles

Classic hat with a lapel is knitted with an elastic band 1x1 or 2x2 (facial and purl)... After 5-7 cm is knitted with an elastic band, it is necessary to change the knitting in a checkerboard pattern: knit the front loops with the wrong one, and the wrong one with the front one. In this way, a fold line of the lapel will be outlined, along which it will be possible to bend the edge. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! An elastic band made of soft yarn stretches well, so it is important to make it the size of the head or a little narrower.

When the elastic is complete, you can go to the main part of the hat and knit it with the desired pattern.

Double knitted hat

This is a warm hat in two layers. There are quite a few options. The easiest way is to knit in satin stitch on stockings and circular needles, starting from the crown. In fact, you should get a stocking closed on both sides.

Roll the thread into a ring and, introducing the knitting needles through it, dial 12 loops, 3 loops on each knitting needle. You can also type in the usual way, but then you get a small hole in the middle. Knit a row of knit.

12 times add 8 loops in a row: 1 row - front, increase, front, increase, front (so on each knitting needle). Subsequent even rows are facial. 3 row - front, increase, 3 front, increase, front, etc. (add on each knitting needle after the first and before the last loop). The result should be 4 wedges.

As 24 rows will be knitted, change the knitting needles to circular ones and start knitting with satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Make reductions (guideline by markers) 12 times: 1 row - front, remove, front, throw the previously removed loop over it, front up to 3 extreme loops (to the marker), 2 together, front, etc. Only 24 rows.

Tighten the last 12 loops with a working thread.

Knitted hat made of thick yarn

Simple hats with a simple pattern are knitted pretty quickly from thick yarn. Thick yarn is considered to be skeins weighing 100 g and no more than 140 m long. Accordingly, large knitting needles from 8-10 mm will be needed, depending on the thickness of the thread.

Usually, 30-40 loops of thick yarn are typed on the knitting needles and knitted in a circle with garter stitch, elastic or satin stitch.There is no need to make additions, the decreases are made classic.

Knit a hat for spring with knitting needles for women - new models

In the spring, you can dream up and knit not only warm, but also beautiful models of hats.

Knitted turban hat

A simple turban is knitted with an English elastic band 1x1 with a single cloth about 12x90 cm (you should get a narrow scarf). Having knitted the scarf to the desired length, close the loops in the usual way. Then the finished canvas is collected in a turban and stitched.

Try on a scarf on your head, wrapping it in the form of a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand exactly which sections you need to sew, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and from the sides on the wrong side.

Important to remember! To correctly calculate the size of the cap, you need to knit a sample of 10 loops by 10 rows, wash, dry and measure.

Women's hat beret with knitting needles with a description and diagrams

Knitting of a beret from a hat differs in mandatory increments in 1-2 rows after the elastic. This will help expand the knitting to the correct diameter.

The elastic of the beret should fit snugly on the head... As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows, uniform decreases are made from the elastic.

Hat with English elastic band (2x2) knitting needles

This is a fairly simple pattern, similar in execution to a takori hat.

You will need a relatively thin acrylic yarn such as Alize Lanagold yarn (100g / 240m), as well as 3.5mm circular needles and a needle.

How to knit:

1. Cast on the needles a multiple of 4 loops.
2. Knit according to the principle of a classic English elastic band, but knit 2 loops: Knit 2, double crochet stitches removed, next row - according to the pattern, etc.
3. Having knitted to the desired length, go to the 1x1 elastic band: knit front, 2 with a crochet front, purl and then in a circle.
4. Knit the following rows according to the pattern (5-6 cm).
5. Decrease as if knitting a tacori hat.
6. Thread the cut thread through the needle and pull it through all the loops.

Hat with knitting needles (scheme)

There are many options for this model. In a simple, classic hat, braids of 4-6 loops are separated by 2-4 purl loops.

Cast on the knitting needles a multiple of 2 loops and start knitting in a circle 2 front, 2 purl (2x2 elastic). After 5-7 cm of knitting, change the knitting needles to thicker ones, go to the surface and add loops every 3 loops.

To knit rapport for braids: knit 6 front loops, 3 purl, 6 front, etc. After knitting 4 rows, knit the braid on the front loops, and then repeat the rapport from the beginning.

Having tied to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decrease. Pull the last loops together.

If you alternate through an equal number of rows of braids with a knitting needle behind and before knitting, you get a "braid"... For example, one row - 120 loops, one braid consists of 12 loops, respectively, 10 wide braids will turn out around the cap.

10 rows of satin stitch are knitted, then a row with braids is made: remove 6 loops on the third knitting needle and put away for work, knit 6 row loops, and then loops from a short knitting needle. This is how the whole row fits. After the next 10 rows of stitching, the order changes: 6 loops on the auxiliary knitting needle remain before work, and so on.

It is important to know! The braids slightly compress the diameter of the hat, so it is necessary to add a large number of loops in 1-2 rows (there may be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a row of "oblique", it is necessary to try on the future hat: the pattern should not compress the head.

Knitting pattern for Kubanka caps for women (with description)

The Kubanka hat is a rather original model, characterized by a rectangular shape... The complexity of this model lies in the fact that when moving from the crown to the bottom of the cap, it is necessary to tie the roller.

For size 57, cast on 130 loops on 4 mm needles.Knit with a 1x1 elastic band for about 4-5 rows, and then, without adding loops, proceed to knitting the main part of the cap to the crown (you can make a suitable pattern).

Make a roller by knitting 8 rows with 1x1 elastic band. It is necessary to connect rows 1 and 8: pick up the loops from the first row of the elastic and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue knitting in satin stitch, decreasing 7 loops in each front row (knit on the wrong side without decreasing). The result should be 7 wedges. Pull off the last loops with a thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. but each model has its own characteristicswhich can be difficult to knit.

Hat with knitting ears

A cute simple hat with ears is knitted in a garter stitch in a circle or as a takori: English or classic elastic, but does not close with decreases. Having tied the hat above the top of the head, you need to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the "pipe"... To do this, you need to sew the top of the cap, starting from the center, from the seamy side (connect the seamy loops). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the cap.

Beanie hat (stocking) with knitting needles: knitting pattern

This is a simple model that novice needlewomen can handle with knitting. Usually "stocking" is knitted with garter stitch without patterns. This model differs from all the others in its rounded top and rather long length (the top of the cap should fall off the head).

To knit this model, you will need thick yarn, for example, "Nako Jersey" (100 g / 74 m) or Trinity yarn "Melody" (100 g / 100 m), needles 6-7 mm, a needle.

Knitted hat-stocking in vertical and shortened rows... To do this, you need to dial 45 loops on one knitting needle (along the length of the cap) and knit 40 loops with the front. The remaining 5 loops are not knitted and remain on the right needle.

Expand the work and knit in the opposite direction with garter stitch. In row 3, knit 41 loops, leaving 4. In row 5, 42 loops are knitted, in 7 - 43 loops, in 9 - 44, in 11 - 45. From 13 to 22 rows knit front loops. Row 23 is knitted as 1 and further (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the bini should be slightly narrower than the lower due to the wedges.

Repeat knitting until the desired width is reached (5-7 gussets). After the last row, the working thread should be at the top (if this is not the case, knit another row). Close the loops with purl, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the cap lengthwise (from bottom to top). At the top, thread a needle through the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on loops to fit.
2. Knit with an elastic pattern from 2 front and 3 purl.
3. Having knitted to the crown, make decreases in a circle on the purl loops: purl 1, 2 together, etc. (you get a regular elastic 2x2, knit about 7 cm according to this pattern).
4. Decrease purl stitches (row 1).
5. Knit a row according to the pattern (knit 2, purl 1).
6. Pull the thread through the last loops and pull off.

Beanie with gradient knitting

Hats with a gradient look unusual due to the smooth transition from one color to another. The secret of this knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times, depending on the thickness... Having knitted the lower part of the cap, start gradually replacing the threads with a different color: first change 1 thread, then 2, 3 and further, until all the threads "change" color.

You need to mentally calculate when to change the color.For example, if the working thread consists of 3 threads, then you need to mentally divide the cap into 4 parts: part is knitted in one color, part - with 1 thread of a different color, part - with 2 threads, part - in a different color.

Knitted pom-pom hat

The pompom nicely complements the hat and can hide minor flaws on the crown. The simplest pompom can be made using cardboard bagels or a special circle.

Cut 2 circles out of cardboard with rounded holes in the middle - "bagels". Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the center hole is tightly wrapped with threads, you can use a needle.

The tightly wound threads are cut in a circle (the cut is made along the edge) to the cardboard. Slightly spread the cardboard rings to the sides so that you can conveniently pull and tie a skein of thread in the middle. After that, the rings are removed or cut, and the pom-pom affects the ball. Protruding threads, irregularities can be trimmed with scissors.

Knitted men's hat (diagram with description)

There are models of hats that are more suitable for men than for women, for example, a hat with earflaps or a hat with a helmet.

Knitted hat with earflaps

Hats with earflaps, depending on the thickness of the yarn and lining, can be either winter or demi-season. The main difficulty in performing this model is knitting the "ears". It is with them that knitting begins so that the hat turns out to be smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army hat of the White Army. Initially, it was an exclusively male headdress.

A simple one-sided hat with "ears" is knitted with garter stitch (you can knit in satin stitch). For work, you will need yarn of medium thickness (for example, 100 g / 120 m), circular and ordinary knitting needles 4-6 mm, a needle.

First, cast on 12 loops on the needles and knit 8 rows, adding 1 loop at the beginning of each row with the usual set. Knit 14 rows without increments. Cast on 8 stitches at the beginning of the row and knit 20 rows. Tie the second "ear" in the same way.

Cast on 22 loops and knit a visor of 4 rows, adding 2 loops at the beginning (on the knitting needle you should get 30 loops). Next, knit 24 rows without increments.

Connect the connected parts using circular knitting needles, knitting the loops of one "ear", then the loops of the visor and the loops of the second "ear", close the knitting into a ring. Knit in a circle for about 36 rows.

Decrease evenly through a row of 7 loops. When there are 20 stitches left, decrease in each stitch (10 stitches remain). Pull the thread and pull.

Knitted helmet hat

This model is knitted quite difficult, as it ties the head from the crown to the shoulders.

Usually, the helmet fits from top to bottom... First, loops are typed on 4 stocking needles (8-12 loops) and rows are knitted in a circle with increments at the beginning and at the end of each knitting needle. When the circle is large enough (on the head), you can switch to circular knitting needles and knit further in a circle without increments to the forehead line.

Transfer the loops across the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, cast on additional loops, close the circle and knit the neck. For the shirt front, dial additional raglan-type loops on top, knit the required width.

Tie the front part with an elastic band and close the loops.

Knitted sock cap

Men's sock-hat knits like a women's beanie hat, that is, you can start from the side and knit in shortened rows.

There is another option: knit in a circle with a dense 1x1 elastic band, and then divide the loops in a row into 3-5 wedges, put markers and start making decreases through the row, focusing on the markers. Pull the remaining loops with a thread.

Hat made of thick yarn with knitting needles (knitting pattern)

Thick yarn for men can be knitted similar to female models. The only thing difference - drawing and pattern... For men, a more strict, geometrically correct pattern is suitable for a coat or jacket.

Most men's hats of large knit are knitted with elastic bands, garter stitch, satin stitch, vertical braids.

It is important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool clothes must not be twisted and can only be dried horizontally. This will help avoid deformation of the product.

Knitted baby hat

Children's hats often resemble bonnets, that is, they cover the entire back of the head and are tied under the chin. This is the main feature of such models. The rest of the hats for children are knitted according to the same principle as for men and women.

Knitted hat for newborn

A simple hat-cap for a newborn of any gender is knitted with a satin stitch made of acrylic or semi-woolen thin or medium yarn of about 100 g / 150 m.

On two knitting needles, the cap is knitted as follows:

• cast on 42 loops;
• knit an elastic band 2x2 about 8 rows;
• go to the surface and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of the canvas in half and sew the upper edges together through the edge loops. Sew a lace or yarn string to the bottom edges.

Knitted hats for a boy with needles (with description)

For boys, you can knit hats with earflaps with ties, helmets or regular stockings. The hat can be decorated not only with voluminous patterns, but also with a jacquard pattern.

Knitted hat for girls

A simple hat for a girl is knitted with various patterns, both large and small knitted. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to tie a hat with an elastic band and garter stitch... To do this, you need a fairly thick yarn (100 g / 100 m) and 7 mm needles.

Cast on 72 stitches on circular knitting needles and close into a ring. Knit 2x2 elastic for about 15 rows. Next, go to the drawing from the alternation of 2 front and 2 purl rows. Knit up to row 29.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

An owl hat for spring for a girl with knitting needles: a diagram with a description

A beautiful “Owl” hat with an ornament and “ears” is knitted on circular knitting needles 4 mm with 100 g / 130 m yarn.

First, cast on 64 loops and knit 4 rows in satin stitch. Next, knit 2 rows according to the pattern: 26 on the wrong side, 12 on the front, 26 on the wrong side. Starting from row 7 from the beginning, start knitting the pattern on 12 center loops (the rest of the loops are knitted with purl). Knit even (purl) rows according to the pattern.

In the first row, alternate 3 facial and yarn in the middle. In the 3rd row, knit 3 loops with the front, then throw on the thread, knit 9 with "rice", throw on the thread, 3 with the front ones. Rows 5 and 7 are knitted like 3, but in the middle knit 11 and 13 loops, respectively, with "rice". In rows 9-15, knit 3 knit, 13 "rice", 1 knit.

17 and 19 rows - 3 front, decrease, 7 "rice" (in 19 - 5), decrease, 3 front.

In row 21, make a braid on 6 knitting needles, leave an additional one at work. Knit front and again braid on 6 loops.

In 23, 25 and 27 rows, 13 stitches are knitted with the front stitch, 29 rows are knitted like 21.

31 (33) row - 3 (2) front, 7 (9) purl, 3 (2) front. 35 row - 1 front, 11 purl, 1 front.

From row 37, knit the next 9 rows with purl stitch, and then close the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select a hypoallergenic yarn specially designed for children. Typically, this yarn contains acrylic, merino wool or fiber. These materials are non-irritating, the clothing does not chafe and is soft against the body.

How to knit a beautiful simple women's hat with knitting needles for beginners: a step-by-step guide

So, knitting of any model of a hat can be roughly divided into 5 main stages: elastic, increase, base, decrease, closure. Some steps may be missing depending on the model. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to English or patent elastic, then there is no need to make any increments - the knitting will turn out to be magnificent.

You can also skip the first step, that is, start knitting immediately from the main pattern. If you immediately knit in satin stitch, then the edge will most likely curl into a small roller - you get an original lapel.

The general knitting pattern includes the following steps:

1. Type the number of loops on the stocking or circular needles according to the size of the head from the calculation according to the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Switch to larger needles (1-2 mm more) and make increments in the next row after the elastic (5-40 increments).
4. Knit in a circle with the main pattern.
5. At the top of the head, begin to close the knitting, evenly decreasing several loops in a row, alternate rows with decreases with the usual rows in the pattern.
6. Pull the thread through the remaining 6-20 loops with a needle, pull off and fasten the thread at the crown.
7. Wash the finished product and dry.
8. If desired, decorate the hat with a pom-pom (ready-made or homemade).

How to crochet a hat

A simple hat is crocheted from the crown of the head in single crochet columns with the gradual addition of loops. When the diameter of the head is reached, it is necessary to knit the hat to the end without increments.

Knitting hats: models and patterns for free

 In the informative video below, you can see how to knit a hat.

Knitting patterns for women's, men's, children's hats with a description are shown in detail in the following video clip. Take a look.

The presented models are just a few of the mass of possible options for caps. Each needlewoman can come up with her own author's model, draw a diagram or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.