How to glue rhinestones on gel polish, so as not to fall off, hold for a long time, without glue. Video expert advice

To emphasize individuality and create a sophisticated, sophisticated look, you can make a manicure with gel polish with pasted rhinestones. Women who first decided to try this type of Neil art-manicure on their own should be aware of the recommendations, following which one can avoid gross mistakes and achieve an effective result.

Choice of rhinestones

Rhinestones for gluing on gel polish must be purchased of high quality. Cheap elements are characterized by fuzzy edges and the presence of various defects, since in this case it will not be possible to achieve a beautiful and durable decor.

For work, you will need rhinestones with a flat bottom surface, intended for manicure, and not their counterparts used to decorate clothes.

Material

Rhinestones can be plastic, glass or crystal.

For the manufacture of plastic, acrylic is used, which conquers:

• cheapness;
• a variety of shapes and colors;
• convenience of work for novice craftswomen and those who need nail inlay for 1 evening.

For a longer period, plastic rhinestones are not suitable, because:

• fade quickly;
• lose transparency when in contact with household chemicals;
• it is impossible to glue them firmly.

Glass rhinestones are more expensive and retain their attractive appearance longer.

Among their advantages:

• ease;
• strength;
• resistance to aggressive substances;
• the ability not to lose color brightness within 2-3 weeks;
• high reflectivity for gloss.

Crystal rhinestones from Swarovski are made of crystals, close in their chemical composition to rock crystal.

Benefits include:

• strength;
• ease of gluing;
• long-term retention of gloss and bright color.

They are commonly used in prestigious beauty salons. With their help, the masters manage to create luxurious compositions, thanks to the ease of fixation (due to the rough "bottom"), the correctness of the shapes and the variety of colors. The only drawback is the high cost.

The size

The modern industry produces rhinestones in a wide range of sizes, from 8 mm diameter (ss40) to small samples with a diameter of 1.2 mm (ss3). Some manufacturers can also find smaller products (from 0.8 mm).

In order not to be mistaken with the size when buying, it is necessary to use special tables that give an idea of ​​the ratio of the size of the nail and the rhinestone.

When choosing for this parameter, it should be borne in mind that large rhinestones:

• used to decorate only one nail as the centerpiece of the composition;
• visually reduce the nail;
• difficult to attach to the nail plate;
• not always practical, as they tend to cling to clothing and easily come off.

Certain difficulties are also caused by inlaying with small rhinestones, therefore, among professionals, the most popular are medium-sized samples, marked ss5, ss8, less often - ss12: working with them is most convenient, and the resulting drawings look fashionable and elegant.

The form

In this case, everything will depend on the selected template for the pattern (bindis).

The round shape is considered traditional - it is the round rhinestones that are recommended for beginners.

Craftswomen who already have experience in creating such a manicure can purchase rhinestones:

• classic round with clear edges;
• polished in the form of smooth hemispheres;
• small (less than 1.5 mm) Pixie crystals (crystalline chips);
• Siju pearls, reminiscent of colored sea stones;
• conical, designed for decorating extended nails;
• charms are products with a complex shape: hearts, bows, snowflakes.

Colour

When choosing this parameter, they are guided mainly by their own preferences, but there are general rules to know:

• rhinestones of bright colors are used in combination with varnish in calm tones and vice versa;
• "Gold" stones require that all other jewelry also be made of gold. The same applies to the “silver” on the nails;
• the color of the rhinestones should be in harmony with the lipstick and the woman's clothes;
• bright light stones are more suitable for young girls, older women should choose deeper, darker shades;
• transparent rhinestones, as well as stones of natural "flesh" shades are considered a universal solution.

Please note that rhinestones should be in harmony with other jewelry by the type of shine, which happens:

• traditional;
• mother-of-pearl (pearl);
• holographic ("gasoline"). These rhinestones are sometimes called "chameleons" for their ability to change color depending on the angle of view.

Manufacturer

The quality and durability of the manicure depends on the correct choice according to this criterion.

In addition to the Austrian Swarovski brand, the leader in the production of jewelry, the following manufacturers are popular:

• Preciosa (Czech Republic). The products of this company are as close as possible to Swarovski jewelry in quality;
• Patrisa nail (Germany);
• Konad (Korea);
• Bluessky (Russia).

Those who prefer plastic rhinestones can purchase products from Chinese manufacturers:

• TNL;
• In'Garden;
• NelTes.

When buying Swarovski crystals, you should require documents (certificate) confirming the quality of the goods. Unscrupulous sellers, under the guise of rhinestones for manicure, offer products for decorating clothes.

Adhesive selection

To fix the rhinestones on the nail plate, compounds are used that provide the desired fastening strength, do not enter into a chemical reaction with the rhinestone material and are invisible on the nail plate.

These include:

In specialized stores, you can buy plastic or glass rhinestones on a self-adhesive base, which are easy to work with. Outwardly, they are indistinguishable from their expensive counterparts, but they cannot boast of high fastening strength and durability.

Methods for gluing rhinestones

How to glue rhinestones on gel polish depends on the selected pattern, the characteristics of the adhesive composition and your own preferences.

The adhesive can be applied:

• immediately to the entire surface of the nail or to a specific area of ​​it;
• point to the place where the rhinestone will be located (used mainly for large beads);
• on the rhinestone itself, followed by fixation on the nail plate. The method works well when using a quick-drying glue.

Required tools and materials

The first purchase of everything you need to create a masterpiece from gel polish and rhinestones will require significant financial costs.

Most of the tools and materials will serve for a long time, so it is better not to save money and purchase:

• a lamp for drying varnish. Possible options: UV-lamp - inexpensive, allowing you to dry 2 hands at once, but assuming a long (more than 2 minutes) drying time; LED lamp - more expensive and faster (only 30 seconds for drying); hybrid - the most expensive, but combining the advantages of the 2 previous options;
• primer - composition for degreasing the nail plate;
• base coat - the first layer of varnish, leveling the surface of the nail and hiding minor defects;
• color gel polish that gives the nail the desired color;
• top - a protective topcoat that can be used in parallel as an adhesive. If it will be used to fix rhinestones, it is advisable to give preference to a thick composition without stickiness. You can increase the density using acrylic powder, adding it to the top in a 1: 3 ratio;
• glue (optional);
• tools for pretreatment of the cuticle and nail plate: bath, nail scissors, tweezers, orange sticks, buff;
• magnetic (wax) pencil for working with rhinestones. In its absence, you can use an orange stick for this purpose by moistening its tip with water;
• klinser - liquid for removing the sticky layer;
• a set of brushes for applying base, varnish, top and cleanser.

Step-by-step technique for gluing rhinestones

How to glue rhinestones on gel polish so that they look beautiful and of high quality depends on attention, patience and accuracy.

For this:

1. Nails are prepared for the procedure: cleaned, degreased, polished.
2. Gel polish is applied to all nails, which will be decorated with rhinestones.
3. After the manicure on them is completely completed, you should start gluing.

Bonding to gel polish

It is necessary to choose a drawing in advance, prepare rhinestones and the necessary tools, after which:

1. Treat the nail by cutting the cuticle, sanding the nail plate with a buff and covering it with a primer.
2. Apply base and dry under the lamp.
3. Apply 2 layers of colored gel polish, drying each layer. All these actions can be combined with the manicure of the remaining nails, but in the absence of experience, it is advisable not to do this.
4. Apply a top coat (in a continuous layer, strip or drops) to the part of the nail where the rhinestones will be.
5. Lay out the drawing, starting from the middle of the nail and moving from its edge to the cuticle. Rhinestones are taken with a magnetic pencil or an orange stick dipped in water, placed in the right place and lightly pressed.
6. If necessary, correct the position of the beads.
7. Dry the nail plate.
8. With a small brush, apply the top to the free areas of the nail, grabbing only the edges of the rhinestones. It is not necessary to cover their surface with the composition, otherwise the beads will lose their shine.
9. Remove the sticky layer with a clinker (operation is not necessary if a special top for rhinestones is used).

Bonding with special glue

The initial treatment of the nail, the application of the base and gel polish are performed in the same way as in the previous case. You can immediately cover the nail with a top and fix it with a lamp or not cover it: it doesn't matter.

Then the following actions are performed:

1. The places where the rhinestones will be located are determined.
2. A drop of glue is applied to each of the selected points, after which the rhinestone is immediately installed. To make the connection more durable, the droplet should be slightly larger than the rhinestone. Press the bead slightly so that it sinks into the glue.
3. The rest of the rhinestones are also installed.
4. After the glue has hardened, the free areas are covered with top and the nail is dried under the lamp.
5. At the last stage, cleaning with a clinker is performed.

Common mistakes

It will not be possible to completely avoid flaws and blunders, especially during the first attempts to create a manicure with rhinestones, but it is possible to minimize their number if we take into account the mistakes of predecessors and try not to repeat them.

Style errors

How to glue rhinestones on gel polish so that the manicure, on which the effort was spent, justifies expectations, depends on observing a sense of proportion.

The main thing is not to overdo it with the number of rhinestones, guided by the general rule - the larger the rhinestones, the less they should be on the nails.

In particular:

• large samples decorate only 1, maximum 2 on different hands of the nail;
• this rule also applies when the entire area of ​​the nail plate is covered with medium-sized rhinestones;
• to decorate all 10 nails, you need to select medium or small rhinestones, and the pattern made from them should occupy only a small part of the nail;
• if you want to completely decorate the surface of all nails, then rhinestones of the minimum size or crystal chips are suitable for these purposes.

Nails decorated with rhinestones impose restrictions on all other jewelry present in the image of a girl.

Prohibited:

• rings, since rhinestones are their full replacement;
• jewelry with natural precious stones: it is recommended to do with jewelry;
• the number of jewelry should not be excessive: for example, if one nail is decorated with rhinestones, the image can be supplemented with earrings and a pendant, matched in style and color; with 2 inlaid nails, the pendant will have to be abandoned.

Another common style mistake is using gel polish with a shiny surface as a base for rhinestones. In this case, an obvious overkill of brilliance is created, making the image vulgar. If you intend to decorate your nails with rhinestones, you should opt for a gel polish with a matte or satin texture.

Cheap plastic rhinestones look on the fingers of a young girl, but are absolutely inappropriate in the image of a solid woman.

Material selection errors

You should pay maximum attention to the choice of rhinestones and other materials, taking into account the following:

• if you plan to decorate your nails with rhinestones for a long time, you cannot use impractical plastic samples;
• when buying large, voluminous rhinestones, it must be borne in mind that it will be inconvenient to do housework with such a manicure on your hands;
• the top should be carefully selected: if it is too liquid, it will not be possible to neatly inlay;
• you do not need to purchase a cheap gel polish: it can crack or blow up with bubbles when it dries;
• in the absence of experience, the use of special glue is undesirable due to its short drying time: it will be difficult to correct the position of an incorrectly installed pattern element;
• when buying rhinestones of large and medium sizes, it is important to carefully check them for the absence of chips, the correctness of the shape: any defect will be clearly visible to others.

Errors at work

The most important mistake is the haste and attempts to shorten the drying time of the varnish: the coating in which the polymerization process is not completed is fragile, and the manicure is short-lived.

Typical mistakes of inexperienced craftswomen that can ruin the work:

• Gluing rhinestones too close to the tip of the nail: about 1-1.5 mm should remain before it, otherwise chips will quickly appear on the beads at the very edge.
• You should not glue rhinestones near the cuticle itself: let there be some free space here.
• Attempts to install another rhinestone between the samples already glued and fixed under the lamp: rhinestones are displayed sequentially, one after another. If necessary, their position is immediately corrected and only after that the nail is sent for drying.
• If you have little experience, you can divide the drawing into separate fragments with successive drying of each of them. For example, when applying to the entire area of ​​the plate, first cover only one half of the nail with rhinestones, dry it, and then proceed to the second half;
• Installing rhinestones with your fingers. Use a magnetic pencil, chopsticks, or toothpick.
• Applying the top over the rhinestones: this leads to a decrease in their reflectivity and a decrease in shine: only the free areas of the nail plate and the end edges of the beads should be covered with the top.
• The wrong order of applying the finishing coat after installing the rhinestones: first of all, the areas between the rhinestones are processed, while the brush moves first along the nail, then across. On areas bordering the cuticle, the top should be applied last and dried immediately.

If you neglect this rule, then the composition, flowing down under the cuticle, will create a roller around the perimeter of the nail plate. This will not only make the manicure less attractive, but also significantly reduce the durability of the varnish.

Care errors

How to glue rhinestones on gel polish so that they hold strong enough and for a long time within 3-4 weeks, knowing is just as important as about the subsequent care.

• use gloves when working with household chemicals;
• abandon attempts to use nails when you need to pry something off, scrape off;
• gently file the edge of the nail;
• restore the top from time to time.

Thermal stickers with rhinestones

A pattern of rhinestones, placed on a special thermal film, will become a "lifesaver" in the case when there is no time for gluing individual elements, but it will require additional equipment: a heat press or a thermal applicator.

Iron-on stickers can completely cover the entire surface of the nail or be a strip of transparent film with a pattern.

In the first case, to decorate nails you will need:

• perform a hygienic manicure by removing burrs and giving the nail the desired shape, corresponding to the shape of the sticker;
• prepare the nail: that is, sand and degrease its surface;
• put the sticker on the nail and fix it by ironing it with a heat press. Movements are performed easily and gently in the direction from the center of the nail to its edges;
• wait about 3 minutes for the adhesive to harden.

If the thermal sticker is a strip of film with a pattern, you must cover your nails with gel polish, including the top, before applying it.

How to remove rhinestones from gel polish

If you remove the rhinestones correctly, they can be used again.

Usually used:

• Compositions for removing gel polish. They soften the base, after which the beads can be easily removed with a toothpick or a manicure pusher (its spatula-shaped back side). The method works under the condition that the fixation to the top was performed.
• Liquid for removing glue. It works in a similar way and is used for rhinestones fixed with glue.
• Pushers, tweezers, other sharp objects. To reduce the risk of damaging the rhinestones, each pebble is removed separately, starting with the outermost ones. It pushes on with a spatula and rises.
• Files and buffs. When the rhinestones are glued firmly, they need to be cut down. After the rhinestones are removed, a thick layer of the top is removed (it can be cut with a hard file) and the lower layers of the varnish.

Starting for the first time to perform a manicure with gel polish with rhinestones, you should limit yourself to the simplest option for gluing decor. It is recommended to leave the implementation of more complex ornaments for the future.

Video about the technique of performing manicure with rhinestones

What are the types of rhinestones and methods of fixing them to gel polish: